INSERTER 2000
available options |
Bar code and OCR (A1, B1) reading feature. Chip
contact initialising. Collator for the insertion of enclosures to the main
letter: from 2 to 8 feeding stations stacked in a column |
card dimensions |
Card size ISO standard CR-80; thickness from 0.40 to
0.80 mm |
carrier form |
Standard A4 format or American letter size, single
sheet feeding |
communication interface |
Serial RS232 port |
electrical requirements |
117 V/60 Hz – 220 V/50 Hz 230 V/50 Hz – 240 V/50 Hz |
envelope |
Standard type for automatic enveloping systems |
input hopper capacity |
Pre-embossed card automatic feed feature. Standard
data reading system: magnetic stripe LoCo-MeCo/HiCo. |
operating temperature |
5°C – 35°C |
paper thickness |
From 80 to 180 gr., subject to printer paper
handling capabilities. Z shaped folding, knife folding system |
performance throughput |
over 1400 CPH depending on printing system and
format |
physical dimensions and weight (WxDxHxKg) |
1070 x 570 x 1220 mm x 120 Kg. |
power consumption |
2,7 Kw max (Inserter+Mailer) 4,0 Kw max
(Inserter+PC+Printer+Mailer) |
protocols |
Chip. Built-in data analyzer |
relative humidity |
30% - 85% non condensing |
software |
Windows based application software. Error
management, job reporting. DB Sources ODBC/OLEDB. Espert Field Engine. Management
at the same time of one or “n” cards matching per carrier according to card
holder record code. Bar code carrier check. Firmware: self diagnostic,
resettable and non resettable counters. System status and diagnostic messages
reported on PC, alarm on rejected cards. |
|
|